Vol. 56 No. 6 (2024)

Articles

  • Interpreting Arc and Line Shapes in the Fault Ruptures of the 2016 Mw7.8 Kaikoura, New Zealand and the 2023 Mw7.8 and Mw7.6 East Anatolian Fault, Turkey-Syria Earthquakes: A Theoretical Approach

    Mudrik Rahmawan Daryono (1), Gino de Gelder (2), Adi Patria (3)
    (1) Research Center for Geological Disaster, Badan Riset dan Inovasi Nasional (BRIN) – Indonesian Research and Innovation Agency, Bandung, KST Samaun Samadikun, Jalan Sangkuriang, Bandung 40135, Indonesia ,
    (2) Institut des Sciences de la Terre (ISTerre), Grenoble Alpes University, IRD, 1381 Rue de la Piscine, Grenoble 38610, France ,
    (3) Research Center for Geological Disaster, Badan Riset dan Inovasi Nasional (BRIN) – Indonesian Research and Innovation Agency, Bandung, KST Samaun Samadikun, Jalan Sangkuriang, Bandung 40135, Indonesia
    679-691
    Abstract : 813
    PDF : 197
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.1
  • Properties of Hydrochar Derived from Arabica Coffee Agro-Industry Residues under Wet Torrefaction Method

    Nyakty Shalihah (1), Adi Setiawan (2), Muhammad Muhammad (3), Shafira Riskina (4)
    (1) Magister Program in Renewable Energy Engineering, Faculty of Engineering, Universitas Malikusssaleh, Jalan Batam, Bukit Indah 24352, Lhokseumawe, Indonesia ,
    (2) Mechanical Engineering, Faculty of Engineering, Universitas Malikusssaleh, Jalan Batam, Bukit Indah 24352, Lhokseumawe, Indonesia ,
    (3) Chemical Engineering, Faculty of Engineering, Universitas Malikusssaleh, Jalan Batam, Bukit Indah, 24352, Lhokseumawe, Indonesia ,
    (4) Center of Excellence-Technology of Natural Polymer and Recycle Plastics (CoE-TechnoPlast) Universitas Malikussaleh, Jalan Batam, Bukit Indah, 24352, Lhokseumawe, Indonesia
    692-703
    Abstract : 277
    PDF : 64
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.2
  • Experimental Investigation of Ammonia/Oxygen/Argon Combustion: The Role of Equivalence Ratio and Nozzle Shape in a Constant Volume Combustion Chamber with Sub-chamber

    Mitsuhisa Ichiyanagi (1), Emir Yilmaz (2), Takuma Ohashi (3), Masato Sanno (4), Guansen Lin (5), Sebastian Gunawan (6), Henry Widjaja (7), Leon Jonathan (8), Gabriel Jeremy Gotama (9), Willyanto Anggono (10), Takashi Suzuki (11)
    (1) Department of Engineering and Applied Sciences, Faculty of Science and Technology, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan ,
    (2) Department of Engineering and Applied Sciences, Faculty of Science and Technology, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan ,
    (3) Graduate School of Science and Technology, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan ,
    (4) Graduate School of Science and Technology, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo 102-8554, , Japan ,
    (5) Graduate School of Science and Technology, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan ,
    (6) Mechanical Engineering Department, Petra Christian University, Jalan Siwalankerto 121-131, Surabaya 60236, Indonesia ,
    (7) Mechanical Engineering Department, Petra Christian University, Jalan Siwalankerto 121-131, Surabaya 60236, Indonesia ,
    (8) Mechanical Engineering Department, Petra Christian University, Jalan Siwalankerto 121-131, Surabaya 60236, , Indonesia ,
    (9) Centre for Sustainable Energy Studies, Petra Christian University, Jalan Siwalankerto 121-131, Surabaya 60236, Indonesia ,
    (10) Centre for Sustainable Energy Studies, Petra Christian University, Jalan Siwalankerto 121-131, Surabaya 60236, Indonesia ,
    (11) Department of Engineering and Applied Sciences, Faculty of Science and Technology, Sophia University, 7-1 Kioi-cho, Chiyoda-ku, Tokyo 102-8554, Japan
    704-715
    Abstract : 286
    PDF : 67
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.3
  • Evaluation of Mechanical Properties of Warm-Mix Asphalt Mixtures Prepared with Sasobit and Zeolite Additives

    Wshyar M. Hasan (1), Rana A. Yousif (2), Saeid Hesami (3), Sady A. Tayh (4), Abbas F. Jasim (5), Hawkar H. Ibrahim (6)
    (1) Surveying Engineering Department, College of Engineering, Al-Kitab University, Kirkuk 36015, Iraq ,
    (2) Highway and Transportation Engineering Department, College of Engineering, Mustansiriyah University, 10047-Bab Al Muadham, Baghdad, Iraq ,
    (3) Faculty of Civil Engineering, Babol Noshirvani University of Technology, Shariati Ave., 47148-71167, Babol, Mazandaran, Iran, Islamic Republic of ,
    (4) Faculty of Civil Engineering, Babol Noshirvani University of Technology, Shariati Ave., 47148-71167, Babol, Mazandaran, Iran, Islamic Republic of ,
    (5) Highway and Transportation Engineering Department, College of Engineering, Mustansiriyah University, 10047-Bab Al Muadham, Baghdad, Iraq ,
    (6) Civil Engineering Department, College of Engineering, Salahaddin University-Erbil, 44002 Erbil, Kurdistan Region, Iraq
    716-726
    Abstract : 247
    PDF : 104
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.4
  • Biosynthesis and Antibiofilm Activity of Zinc Oxide Nanoparticles

    Vita Wonoputri (1), Tjokorde Walmiki Samadhi (2), Shafira Khairunnisa (3), Eka Rahayu (4)
    (1) Faculty of Industrial Technology, Institut Teknologi Bandung, Indonesia ,
    (2) Faculty of Industrial Technology, Institut Teknologi Bandung, Indonesia ,
    (3) Laboratory of Microbiology, Indonesian Food and Drug Authority Regional Office in Bandung, Indonesia ,
    (4) Research Center of Food Technology and Processing, National Research and Innovation Agency, Indonesia
    727-741
    Abstract : 168
    PDF : 37
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.5
  • Optimization of Ultrasonic and Microbubble Disinfection for Escherichia coli and Staphylococcus aureus: Experimental Design and Effectiveness Evaluation

    Siwasit Pitjamit (1), Norrapon Vichiansan (2), Komgrit Leksakul (3), Dheerawan Boonyawan (4)
    (1) Department of Industrial Engineering, Faculty of Engineering, Rajamangala University of Technology Lanna, Tak 63000 , Thailand ,
    (2) Multidisciplinary Center, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand ,
    (3) Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand ,
    (4) Plasma and Beam Physics Research Facility, Chiang Mai University, Chiang Mai 50200, Thailand
    742-755
    Abstract : 85
    PDF : 6
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.6
  • Fatigue Evaluation of Steel Truss Arch Bridge Based on Traffic Load Simulation Using Weigh-in-Motion Data: Case Study of Rumpiang Bridge

    Rio Pramana (1), Ivan Sandi Darma (2)
    (1) Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia ,
    (2) Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia
    756-770
    Abstract : 92
    PDF : 29
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.7
  • Utilization of Syngas as Co-firing Fuel for Carbonization of Arabica Coffee Pulp

    Rizqon Hasibuan (1), Adi Setiawan (2), Faisal Faisal (3)
    (1) Magister Program in Renewable Energy, Faculty of Engineering, Universitas Malikussaleh, Jalan Batam Kampus Bukit Indah, Blang Pulo, Lhokseumawe, 24352, Aceh, Indonesia ,
    (2) Department of Mechanical Engineering, Faculty of Engineering, Universitas Malikussaleh, Jalan Batam Kampus Bukit Indah, Blang Pulo, Lhokseumawe, 24352, Aceh, Indonesia ,
    (3) Department of Mechanical Engineering, Faculty of Engineering, Universitas Malikussaleh, Jalan Batam Kampus Bukit Indah, Blang Pulo, Lhokseumawe, 24352, Aceh, Indonesia
    771-780
    Abstract : 16
    PDF : 6
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.8
  • Improved Risk Assessment of TBM Tunneling Collapse Based on Nonlinear-Cloud Model

    Longjiang Wang (1), Tian Xu (2), Dachao Zong (3), Qiang Han (4), Yongjin Zhao (5), Zhanping Song (6), Yongli Zhang (7)
    (1) China Railway Construction Bridge Engineering Bureau CO., LTD., Tianjin 300300, China ,
    (2) Shaanxi Key Laboratory of Geotechnical and Underground Space Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China ,
    (3) China Railway Construction Bridge Engineering Bureau CO., LTD., Tianjin 300300, China ,
    (4) The Irtysh River basin Development Engineering Construction Administration Bureau, Urumqi 830000, China ,
    (5) The 3RD Engineering Co., LTD. of China Railway Construction Bridge Engineering Bureau Group, Shenyang 110043, China ,
    (6) School of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China ,
    (7) School of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
    781-792
    Abstract : 114
    PDF : 3
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.9
  • Comparative Seismic Evaluation of Building Codes: A Case Study on Structural Performance and Safety

    Jovan Thierry Salim (1), Indra Djati Sidi (2)
    (1) Graduate Program of Civil Engineering Department, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia ,
    (2) Departement of Civil Engineering, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia
    793-807
    Abstract : 35
    PDF : 8
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2024.56.6.10