Vol. 58 No. 3 (2026): Vol. 58 No. 3(2026): June

DOI: https://doi.org/10.5614/10.5614/j.eng.technol.sci.2026.58.3
Published: 2026-02-20

Articles

  • An Experimental Study on the Structural Behavior of RC Columns when Using Crumb Rubber Concrete Combined with Recycled Steel Fibers

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.10
    Hasan A. Alasmari (1)
    (1) Civil Engineering Department, College of Engineering, Taif University, P.O. Box 11099, Taif, 21944, Saudi Arabia, Saudi Arabia
    461-474
    Abstract : 48
    PDF : 11
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.10

  • Influence of Heat and Mechanical Treatments on the Mechanical and Structural Characteristics of Molded Manganese Steels

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.1
    Omar Ben Lenda (1), Hajar El Ganich (2), Sara Benmaziane (3), Elmadani Saad (4)
    (1) The National Higher School of Mining of Rabat (ENSMR), Materials, Mining and Environment: Materials Science and Engineering, BP: 753, Agdal-Rabat, , Morocco ,
    (2) Hassan First University of Settat, High Institute of Health Sciences, Laboratory of Sciences and Engineering of Biomedicals, Biophysics and Health, B.P: 555, 26000 Settat, Morocco ,
    (3) Laboratory of Physical-Chemistry of Processes and Materials, Faculty of Sciences and Technology Settat, Hassan 1st University, BP: 577, 26000 Settat, Morocco ,
    (4) Hassan First University of Settat, High Institute of Health Sciences, Laboratory of Sciences and Engineering of Biomedicals, Biophysics and Health, B.P: 555, 26000 Settat, , Morocco
    299-309
    Abstract : 2127
    PDF : 560
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.1

  • Polyoxometalates as Catalysts for Biomass Conversion: Properties, Applications, and Regenerability

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.2
    Haryo P. Winoto (1), Rezky O. Anggaswara (2), Dian H. Wahyudi (3), Rino R. Mukti (4), Veinardi Suendo (5), Ismunandar Ismunandar (6)
    (1) Chemical Engineering Department, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia ,
    (2) Chemical Engineering Department, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia ,
    (3) Division of Inorganic and Physical Chemistry, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia ,
    (4) Center for Catalysis and Reaction Engineering, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia ,
    (5) Division of Inorganic and Physical Chemistry, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia ,
    (6) Division of Inorganic and Physical Chemistry, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesa No. 10, Bandung 40132, Indonesia
    310-331
    Abstract : 1639
    PDF : 407
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.2

  • Design and Development of a Water Flow Monitoring Device using Mitsubishi FX3U-14MT PLC

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.3
    Herri Trisna Frianto (1), Syahrul Humaidi (2), Kerista Tarigan (3), Dadan Ramdan (4), Doli Bonardo (5), Fauzan Amri (6)
    (1) Post Graduate Program (Physics), FMIPA, Universitas Sumatera Utara, Jalan Bioteknologi No.1, Padang Bulan, Kec. Medan Baru, Kota Medan, Sumatera Utara 20155, Indonesia ,
    (2) Post Graduate Program (Physics), FMIPA, Universitas Sumatera Utara, Jalan Bioteknologi No.1, Padang Bulan, Kec. Medan Baru, Kota Medan, Sumatera Utara 20155, Indonesia ,
    (3) Post Graduate Program (Physics), FMIPA, Universitas Sumatera Utara, Jalan Bioteknologi No.1, Padang Bulan, Kec. Medan Baru, Kota Medan, Sumatera Utara 20155, Indonesia ,
    (4) Department of Electrical Engineering, Faculty of Engineering, Universitas Medan Area, Jalan Rektorat Universitas Area, Kenangan Baru, Kec. Percut Sei Tuan, Kota Medan, Sumatera Utara 20223, , Indonesia ,
    (5) Department of Electrical Engineering, Faculty of Maritime Engineering and Technology, Universitas Maritim Raja Ali Haji, Jalan Politeknik No.KM. 24, Senggarang, Kec. Tj. Pinang Kota, Kota Tanjung Pinang, Kepulauan Riau 29115, , Indonesia ,
    (6) Instrumentation and Control Engineering Technology, Politeknik Negeri Indramayu, Jalan Raya Lohbener Lama No.08, Legok, Kec. Lohbener, Kabupaten Indramayu, Jawa Barat 45252, Indonesia
    332-347
    Abstract : 1123
    PDF : 429
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.3

  • Optimizing Evaporator Design in ORC Systems for Waste-to-Energy Conversion Using FAST Diagram and Value Engineering

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.4
    R. Susalit Setya Wibowo (1), Satmintareja Satmintareja (2), Asep Duduh Abdurahman (3), Suyatmin Suyatmin (4), Darmawan Darmawan (5), Ari Gunawan (6), Kusumawati Dewi Budiarti (7), Nasrul Baddu (8), Adhi Pramono (9), Faisal Faisal (10), Cahyono Nugroho (11), Suharto Ngudiwaluyo (12), Zico Pratama Putra (13)
    (1) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, , Indonesia ,
    (2) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, , Indonesia ,
    (3) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, , Indonesia ,
    (4) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, , Indonesia ,
    (5) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, Indonesia ,
    (6) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, , Indonesia ,
    (7) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, Indonesia ,
    (8) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, Indonesia ,
    (9) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, Indonesia ,
    (10) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, Indonesia ,
    (11) National Research and Innovation Agency (BRIN), Indonesia ,
    (12) Technology Evaluation, Value Engineering and Value Analysis Research Group, Research Organization of Energy and Manufacturing, National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, , Indonesia ,
    (13) Research Center for Nuclear Materials and Radioactive Waste Technology (PRTBNLR), National Research and Innovation Agency (BRIN), KST BJ Habibie, Kawasan PUSPIPTEK Serpong, South Tangerang 15314, Banten, Indonesia
    348-365
    Abstract : 865
    PDF : 226
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.4

  • Enhanced Finite Element Numerical Analysis of Rigid Inclusion Lateral Resistance for Embankment on Slightly Overconsolidated Soft Clay

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.5
    Kanti Haskarini (1), Agus Himawan (2), Masyhur Irsyam (3), Sugeng Krisnanto (4), Darmawan Adi Susanto (5), Bintang Putra Nusantara (6)
    (1) Department of Civil Engineering, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia ,
    (2) PT Promisco Sinergi Indonesia, Jalan Cigadung Raya Timur 144, Bandung 40191, , Indonesia ,
    (3) Department of Civil Engineering, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia ,
    (4) Department of Civil Engineering, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132, Indonesia ,
    (5) PT. ADHI KARYA (Persero) Tbk., ADHI TOWER, Jalan MT Haryono No. 27, Jakarta 13630, Indonesia ,
    (6) PT. ADHI KARYA (Persero) Tbk., ADHI TOWER, Jalan MT Haryono No. 27, Jakarta 13630, Indonesia
    366-378
    Abstract : 816
    PDF : 254
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.5

  • Improving Single-Phase Induction Motor Speed Control Using Model Reference Adaptive System and Fuzzy-Pid Regulator

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.6
    Kurui Faith Jepchirchir (1), Muriithi Christopher Maina (2), Oyie Nicholas (3)
    (1) Murang’a University of Technology, P.O Box 75 – 10200, Murang’a, Kenya, Kenya ,
    (2) Murang’a University of Technology, P.O Box 75 – 10200, Murang’a, Kenya , Kenya ,
    (3) Murang’a University of Technology, P.O Box 75 – 10200, Murang’a, Kenya , Kenya
    379-396
    Abstract : 329
    PDF : 88
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.6

  • An Enhanced Fuzzy Logic-Particle Swarm Optimization Algorithm for the Strategy Control of Self-driving Electric Vehicles

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.7
    Le Dinh Hieu (1), Ngo Xuan Cuong (2), Do Nhu Y (3)
    (1) School of Engineering and Technology-Hue University, Hue, 49000, Viet Nam ,
    (2) School of Engineering and Technology-Hue University, Hue, 49000, Viet Nam ,
    (3) Hanoi University of Mining and Geology, 100000, Hanoi, Viet Nam
    397-416
    Abstract : 306
    PDF : 80
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.7

  • Digital Value Engineering for Sustainable Commercial Buildings: A BIM and Life Cycle Cost-Based Decision-Making Framework

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.8
    Abdul Mateen Khan (1), Wesam Salah Alaloul (2), Muhammad Ali Musarat (3), Socheatra Soeung (4)
    (1) Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak, , Malaysia ,
    (2) Department of Civil and Environmental Engineering, UAE University, P.O. Box 15551, Al Ain, , United Arab Emirates ,
    (3) Faculty of Civil and Mechanical Engineering, Riga Technical University, Kipsalas Street 6A, LV-1048 Riga, , Latvia ,
    (4) Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak, Malaysia
    417-441
    Abstract : 45
    PDF : 11
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.8

  • Comparative Analysis of Photogrammetry Tools for Monitoring Trench and Pipeline Progress Towards Sustainable Construction

    DOI : 10.5614/j.eng.technol.sci.2026.58.3.9
    Muhammad Hassaan Farooq Khan (1), Wesam Salah Alaloul (2), Muhammad Ali Musarat (3), Abdul Mateen Khan (4), Socheatra Soeung (5)
    (1) Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskanda, Perak, 32610, Malaysia ,
    (2) Department of Civil and Environmental Engineering, United Arab Emirates University, Al Ain, 15551,, United Arab Emirates ,
    (3) Faculty of Civil and Mechanical Engineering, Riga Technical University, Kipsalas Street 6A, LV-1048 Riga, , Latvia ,
    (4) Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskanda, Perak, 32610, , Malaysia ,
    (5) Department of Electrical and Electronic Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak, 32610, , Malaysia
    442-460
    Abstract : 38
    PDF : 7
    DOI: https://doi.org/10.5614/j.eng.technol.sci.2026.58.3.9